Our products are made for daily professional use
incl. 19% VAT.
plus shipping and handling
Model: 3000mm total width
1-sided unlocking when lowering
Conventional two-hand operation
+ Shipping costs within Germany
(without islands) Bulky goods.Shipping 196 €
A 2-post lift for cars, sports cars, SUVs & small vans with a short wheelbase up to 4000kg
with conventional two-hand operation
Lift total width of 3000 mm.
Automatic electrical 1-sided unlocking when lowering at the push of a button (with us electrical no cable)
Manuel manual drain valve opener on the pump
The stage is durable, high quality powder-coated, insensitive and almost maintenance-free.
The support arms are automatically locked when lifting. If the stage is completely lowered, this lock is released automatically and enables the car doors to be opened wide.
Automatic mechanical safety lock integrated on both sides.
The powerful motor and two powerful maintenance-free hydraulic cylinders make lifting and lowering easier.
Synchronization wire ropes, which are stored without load, ensure that the support arms are synchronized.
Hydraulic unit on the front Assembled saves space.
2x door stop rubbers, drive-over plate, end safety switch and height-adjustable turntable with rubber pad + plug-in adapter increases the equipment of the lift.
The lift can also be used as a second parking option (parking lift)
2x2 pieces short (front) 1 time extendable
2x2 pieces, long (rear) 1 time extendable
Lift strength: 4000kg
Lifting height: 1900 mm (turntable turned)
Lift height: 1960 mm (turntable turned out)
Max lifting height: 2040 mm (plug adapter + turntable unscrewed)
min. swivel height: 100 mm
Maximum wheelbase: 3000mm
Overrun plate height: 40 mm
Overall height: 2822 mm
Overall width: 3000 mm including hydraulic pump
Drive-through width: 2160mm for larger vehicles it may have to be pushed into the lift because of the total width of 3000mm.
Width between the columns: 2390 mm
Stroke time: approx. 50 sec
Lowering time: approx. 35 sec (adjustable)
Noise level: 70 dB
Weight: approx. 600 kg
Power: 2.2 kW
Current operation: (240V / 50Hz 1phase) or (380V50Hz 3phase) 100 € selectable when ordering.
Scope of delivery:
• 2-post lift including motor unit
• Powerful motor with hydraulic unit
• 2x door stop rubbers
• 4x plug adapter increases
• 4x height-adjustable turntables with rubber pads
• Overrun plate
• Limit switch safety switch
• German user manual + assembly instructions (video)
• Test book for the regular UVV safety test with EC declaration of conformity.
• The lift is supplied in black.
• Easy assembly because 80% pre-assembled
• New goods in original packaging.
(Hydraulic oil and ground heavy-duty anchor not included in the price, can be ordered optionally)
See video how it works or
What is an automatic electrical 1-side release when lowering
Conventional two-hand operation when lowering
Info on floor requirements for foundation statics:
Extension of min length 4000 mm width 3000 mm depth 350 mm.
Concrete of strength class C20 / 25 according to DIN1045: 2001-D7 double reinforced
The depth of the foundation must be at least with a 2 post lift with identical load capacity
Amount to 200 mm .
For their own safety, they do not allow competitors to convince them of a concrete strength
From 100-150mm is sufficient! Statically speaking, no matter from which provider you get the 2 post lift
Always the same floor requirements!